RESOLV Intelligence

Better energy decisions start with better information.

Notes written for engineers, procurement teams and finance leads: what to measure, what to interrogate and where the expensive assumptions usually hide.

Solar18 August 20268 min read

What should an industrial solar feasibility study actually tell you?

A feasibility study is not a quotation with a chart on top. It is the document that decides whether capital should move at all, and on what terms.

Read the article

BESS30 July 20267 min read

BESS for industry: where storage actually fits into the energy system

Battery storage is not a bigger battery for the same job. It answers four specific problems, and only one of them is about generation.

Read the article

Engineering12 July 20266 min read

Before selecting a solar EPC: seven questions procurement teams should ask

The cheapest compliant tender is rarely the cheapest project. These are the questions that separate a contractor from an engineering partner.

Read the article

Complete archive

Every published note.

18 August 2026What should an industrial solar feasibility study actually tell you?Solar / 8 min readA feasibility study is not a quotation with a chart on top. It is the document that decides whether capital should move at all, and on what terms.30 July 2026BESS for industry: where storage actually fits into the energy systemBESS / 7 min readBattery storage is not a bigger battery for the same job. It answers four specific problems, and only one of them is about generation.12 July 2026Before selecting a solar EPC: seven questions procurement teams should askEngineering / 6 min readThe cheapest compliant tender is rarely the cheapest project. These are the questions that separate a contractor from an engineering partner.24 June 2026The load profile is the projectEconomics / 7 min readWhy an average consumption figure is the most expensive assumption in industrial energy planning.2 June 2026When the grid is the constraint: designing micro-grids for remote sitesMicro-Grids / 8 min readRemote sites fail energy planning for a different reason than city sites. There is no fallback, so the architecture has to be complete.14 May 2026Solar plant underperformance: what a first plant review should establishO&M / 6 min readBefore anyone quotes a repair, the plant has to be measured against what it should have produced.

Talk to an engineer