Will the plant notice the changeover?

It should not. Changeover is designed and tested so that critical load sees a supply that holds through the transition.

Energy Storage / Hybrid

Hybrid Systems

Solar, grid and generator orchestrated as one supply instead of three competing ones.

Discuss a hybrid system →

DisciplineAssessment to maintenance

Documented engagements28

Installed by RESOLV8.48 MWp

Designed & supervised4.75 MWp

Registered forPunjab, Sindh, KPK, Islamabad

The problem

Most industrial sites already run multiple sources badly: solar reducing the load, a generator running for hours it should not, a battery doing nothing, and a grid that interrupts when it chooses. Without control logic, each source fights the others.

When this solution applies

/Sites with grid supply plus a generator that runs for load rather than backup.
/Facilities where solar, storage and gensets already exist in isolation.
/Operations where the cost of an unplanned outage is higher than the cost of the fuel.

System architectureHybrid

How it works

Four steps, no handover gaps.

01Source priority per load groupThe site is divided by criticality, and each group gets a defined source order.

02Control philosophyOne controller decides in real time which source serves which load, and which charges storage.

03Protection and changeoverChangeover, synchronisation and protection designed so the transition is not itself the risk.

04Tuning after handoverControl parameters are reviewed against recorded operation in the first months.

RESOLV methodology

How the work is run.

/Criticality mapping of every load group before any equipment selection.
/Generator hours measured, not assumed, to size the solar and storage that will displace them.
/Control logic documented so the plant team can see why the system behaves as it does.

Equipment and technology

Specified against the design.

/Hybrid controllers and energy management systems.
/Storage integrated with existing solar and generation.
/Changeover, synchronisation and metering equipment.

Documented projects

Where this has been delivered.

Only engagements that exist in RESOLV's documented project record appear here.

Project explorer →

This architecture is delivered through consultancy and advisory engagements.

The documented record covers 28 engagements: 8.48 MWp installed by RESOLV and 4.75 MWp designed, supervised or maintained across 2019 to 2026, covering on-grid, off-grid, micro-grid and consultancy work.

Request the engagement record

Engineering notes behind this solution.

BESS30 July 20267 min read

BESS for industry: where storage actually fits into the energy system

Battery storage is not a bigger battery for the same job. It answers four specific problems, and only one of them is about generation.

Read the article

Solar18 August 20268 min read

What should an industrial solar feasibility study actually tell you?

A feasibility study is not a quotation with a chart on top. It is the document that decides whether capital should move at all, and on what terms.

Read the article

Engineering12 July 20266 min read

Before selecting a solar EPC: seven questions procurement teams should ask

The cheapest compliant tender is rarely the cheapest project. These are the questions that separate a contractor from an engineering partner.

Read the article

Related services

Architectures that sit next to this one.

BESSBattery storage for peak control, outage resilience and moving solar into the hours that need it.Open Micro-GridsGeneration, storage, backup and control inside one boundary, delivered for remote operations.Open On-Grid SolarDaytime generation that reduces metered consumption without changing how the facility runs.Open

Relevant industries: Manufacturing, Textiles, Food Processing, Infrastructure, Residential

FAQs

Hybrid Systems: what clients ask.

It depends on the generator's running hours and the shape of the load it serves. Where a generator runs daily for load, displacement can be substantial; where it runs only as backup, the gain is in storage and changeover performance instead.

Next step

Discuss a hybrid system

Five questions, reviewed by an engineer before anyone contacts you.

01 Need02 Facility03 Location04 Scale05 Contact

Step 1 / What do you need?

Continue →

WhatsApp about Hybrid Systems