Does the plant need to shut down for installation?

No. Work is phased around production, and the interconnection is planned with the utility and the plant's own electrical team so the changeover is controlled.

What happens on cloudy days or at night?

The grid continues to serve the site exactly as it does today. On-grid generation reduces consumption; it does not replace the supply.

Solar / On-Grid

On-Grid Solar

Daytime generation that reduces metered consumption without changing how the facility runs.

Request an energy assessment →

DisciplineAssessment to maintenance

Documented engagements28

Installed by RESOLV8.48 MWp

Designed & supervised4.75 MWp

Registered forPunjab, Sindh, KPK, Islamabad

The problem

A facility buys every unit of electricity it consumes, including the units it could have generated on its own roof at midday. The avoided cost is real, but it is only realised if the generation window matches the load window.

When this solution applies

/A dependable utility supply with daytime process or commercial load.
/Roof or land area that can carry an array without structural work that costs more than the project.
/An interconnection point the utility will accept, at low or medium voltage.

System architectureOn-Grid

How it works

Four steps, no handover gaps.

01Measure the loadInterval data across a full operating cycle establishes the daytime consumption the array will offset.

02Model the generationIrradiance, temperature, soiling and degradation are modelled against the measured load, with assumptions documented.

03Design the electrical systemArray layout, string configuration, inverter selection, protection coordination and the interconnection strategy.

04Build, commission, hand overProcurement, construction supervision, testing, documentation and operator training.

RESOLV methodology

How the work is run.

/Load and constraint survey before any design work.
/Design signed by the engineer accountable for commissioning.
/Completion test defined in measurable terms before construction begins.
/Handover pack with as-built drawings, protection settings and monitoring access.

Equipment and technology

Specified against the design.

/Tier-1 photovoltaic modules, including TRINA platforms on delivered projects.
/String and central inverter platforms, including HUAWEI on delivered projects.
/Structures, cabling, metering and protection engineered for the site.

Documented projects

Where this has been delivered.

Only engagements that exist in RESOLV's documented project record appear here.

Project explorer →

Client	Location	Capacity	Year	Case study
LCI Pakistan Limited	Sheikhupura	286.56 kWp	2026	View project
Descon Oxychem Limited	Lahore / Sheikhupura	2.016 MWp	2026	View project
LCI Pakistan Limited	Sheikhupura	296.78 kWp	2025	View project
LCI Pakistan Limited	Sheikhupura	c. 1,000 kWp	2025	View project
Descon Engineering Ltd	Lahore	74.88 kWp	2025	View project
LCI Pakistan Limited	Lahore	64.86 kWp	2024	View project
LCI Pakistan Limited	Sheikhupura	c. 1,001 kWp	2024	View project
Honda Showroom	Jhelum	47.97 kWp	2024	View project
Descon Oxychem Limited	Lahore / Sheikhupura	283.620 kWp	2024	View project
Noon Sugar Mills Limited	Bhalwal, Sargodha	230 kWp	2024	View project
Al Noor MDF	Moro, Sindh	c. 57 kWp	2023	View project
Al-Noor Sugar Mills	Moro, Sindh	185.76 kWp	2023	View project
Frontier Force	Abbottabad	104.5 kWp	2022	View project
Naveena Developers (Pvt) Ltd	Lahore	13.20 kWp	2022	View project
LCI Pakistan Limited	Sheikhupura	1,004 kWp	2022	View project
Al-Noor Sugar Mills	Moro, Sindh	59.40 kWp	2021	View project
Al-Noor Sugar Mills	Karachi	77.76 kWp	2020	View project
Shell Pakistan	Lahore	61.02 kWp	2021	View project
Firhaj Footwear	Lahore	466.65 kWp	2020	View project
Umer Farms (Pvt) Ltd	Sheikhupura	194.40 kWp	2020	View project
Descon Engineering Ltd	Lahore	c. 60 kWp	2019	View project
Umer Farms (Pvt) Ltd	Sheikhupura	758.40 kWp	2019	View project
Tata Pakistan	Karachi	c. 29 kWp	2019	View project

Engineering notes behind this solution.

Economics24 June 20267 min read

The load profile is the project

Why an average consumption figure is the most expensive assumption in industrial energy planning.

Read the article

Solar18 August 20268 min read

What should an industrial solar feasibility study actually tell you?

A feasibility study is not a quotation with a chart on top. It is the document that decides whether capital should move at all, and on what terms.

Read the article

BESS30 July 20267 min read

BESS for industry: where storage actually fits into the energy system

Battery storage is not a bigger battery for the same job. It answers four specific problems, and only one of them is about generation.

Read the article

Related services

Architectures that sit next to this one.

Industrial SolarLarge-array engineering for manufacturing and process plants, delivered around production.Open BESSBattery storage for peak control, outage resilience and moving solar into the hours that need it.Open Engineering & ConsultancyIndependent specification, vendor evaluation, design verification and commissioning oversight.Open

Relevant industries: Manufacturing, Chemical, Textiles, Food Processing, Agriculture, Commercial

FAQs

On-Grid Solar: what clients ask.

That depends entirely on the shape of the load. A daytime-heavy plant can offset a large share; a night-heavy plant much less, and in that case storage is the conversation. The figure is established from your measured profile, not from an industry average.

Next step

Request an energy assessment

Five questions, reviewed by an engineer before anyone contacts you.

01 Need02 Facility03 Location04 Scale05 Contact

Step 1 / What do you need?

Continue →

WhatsApp about On-Grid Solar